Official ICT switch settings
PL77/L77F-UCD9(USD6+CAD3) DIP switch settings
This is the CAD + USD build. The units we supply are configured for US dollars, so the denominations and switch positions below will not match a USD machine. Call (877) 922-6707 or send us a photo of the unit label and we will send you the right sheet.
Every switch function from ICT’s own setting sheet (part number SWY6UC910-R), transcribed into tables you can read on a phone at the machine. Rows marked factory default are how the unit ships.
DIP switch tables
| Function | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 | SW9 | SW10 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 Pulse / USD 1factory default | OFF | OFF | OFF | not used | not used | not used | not used | not used | not used | not used |
| 2 Pulse / USD 1 | OFF | OFF | ON | not used | not used | not used | not used | not used | not used | not used |
| 3 Pulse / USD 1 | OFF | ON | OFF | not used | not used | not used | not used | not used | not used | not used |
| 4 Pulse / USD 1 | OFF | ON | ON | not used | not used | not used | not used | not used | not used | not used |
| 5 Pulse / USD 1 | ON | OFF | OFF | not used | not used | not used | not used | not used | not used | not used |
| 10 Pulse / USD 1 | ON | OFF | ON | not used | not used | not used | not used | not used | not used | not used |
| 20 Pulse / USD 1 | ON | ON | OFF | not used | not used | not used | not used | not used | not used | not used |
| 100 Pulse / USD 1 | ON | ON | ON | not used | not used | not used | not used | not used | not used | not used |
| Fast output Pulse (Lo = 50ms, Hi = 100ms) | not used | not used | not used | ON | not used | not used | not used | not used | not used | not used |
| Slow output Pulse (Lo = 50ms, Hi = 300ms)factory default | not used | not used | not used | OFF | not used | not used | not used | not used | not used | not used |
| Inhibit level Active Low | not used | not used | not used | not used | ON | not used | not used | not used | not used | not used |
| Inhibit level Active Highfactory default | not used | not used | not used | not used | OFF | not used | not used | not used | not used | not used |
| Accept USD 1 & 5factory default | not used | not used | not used | not used | not used | ON | not used | not used | not used | not used |
| Reject USD 1 & 5 | not used | not used | not used | not used | not used | OFF | not used | not used | not used | not used |
| Accept USD 10 & 20factory default | not used | not used | not used | not used | not used | not used | ON | not used | not used | not used |
| Reject USD 10 & 20 | not used | not used | not used | not used | not used | not used | OFF | not used | not used | not used |
| Accept USD 50 & 100 | not used | not used | not used | not used | not used | not used | not used | ON | not used | not used |
| Reject USD 50 & 100factory default | not used | not used | not used | not used | not used | not used | not used | OFF | not used | not used |
| Accept CAD 5 & 10 & 20factory default | not used | not used | not used | not used | not used | not used | not used | not used | ON | not used |
| Reject CAD 5 & 10 & 20 | not used | not used | not used | not used | not used | not used | not used | not used | OFF | not used |
| Accept USD + CADfactory default | not used | not used | not used | not used | not used | not used | not used | not used | not used | ON |
| Accept only CAD | not used | not used | not used | not used | not used | not used | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Credit-Pulse Normal Highfactory default | ON | not used | not used | not used |
| Credit-Pulse Normal Low | OFF | not used | not used | not used |
| Pulse Modefactory default | not used | ON | OFF | not used |
| ccTalk Interface | not used | OFF | OFF | not used |
| ICT104U Mode | not used | ON | ON | not used |
| Reserved | not used | OFF | ON | not used |
| Reserved | not used | not used | not used | ON |
| Reservedfactory default | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| 8-bit checksum | ON | not used | not used | not used |
| CRC 16-bit checksumfactory default | OFF | not used | not used | not used |
| Pulse Mode | not used | ON | OFF | not used |
| ccTalk Interfacefactory default | not used | OFF | OFF | not used |
| ICT104U Mode | not used | ON | ON | not used |
| ccTalk Parameters Restore Switch — Please see "Note" for detail | not used | OFF | ON | not used |
| Encryption Modefactory default | not used | not used | not used | ON |
| Decrypt Mode | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Reserved | ON | not used | not used | not used |
| Reservedfactory default | OFF | not used | not used | not used |
| Pulse Mode | not used | ON | OFF | not used |
| ccTalk Interface | not used | OFF | OFF | not used |
| ICT104U Modefactory default | not used | ON | ON | not used |
| Reserved | not used | OFF | ON | not used |
| Reserved | not used | not used | not used | ON |
| Reservedfactory default | not used | not used | not used | OFF |
| Bill value | Pulse | ICT104U | ccTalk |
|---|---|---|---|
| BV1 | USD 1 | USD 1 | USD 1 |
| BV2 | USD 5 | USD 5 | USD 5 |
| BV3 | USD 10 | USD 10 | USD 10 |
| BV4 | USD 20 | USD 20 | USD 20 |
| BV5 | USD 50 | USD 50 | USD 50 |
| BV6 | USD 100 | USD 100 | USD 100 |
| BV7 | CAD 5 | CAD 5 | CAD 5 |
| BV8 | CAD 10 | CAD 10 | CAD 10 |
| BV9 | CAD 20 | CAD 20 | CAD 20 |
Before you power up
- (1) Please reset the bill acceptor after any changes on Dip switch.
- (2) Dip Switch 1 to 5 are only for Pulse mode.
- (3) Turn this dip to with restart the bill acceptor will restore ccTalk address to its default value of 40 and the encryption key to its default value of 123456.
Not the sheet for your unit?
ICT ships the same model with different firmware and currency sets. Send us a photo of the label on the side of the acceptor and we will tell you exactly which settings apply.