Official ICT switch settings
LX7-A-USD6 DIP switch settings
Every switch function from ICT’s own setting sheet (part number SWCNUS610-R), transcribed into tables you can read on a phone at the machine. Rows marked factory default are how the unit ships.
DIP switch tables
| Function | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 |
|---|---|---|---|---|---|---|---|---|
| Reject USD 1 | ON | not used | not used | not used | not used | not used | not used | not used |
| Accept USD 1factory default | OFF | not used | not used | not used | not used | not used | not used | not used |
| Reject USD 5 | not used | ON | not used | not used | not used | not used | not used | not used |
| Accept USD 5factory default | not used | OFF | not used | not used | not used | not used | not used | not used |
| Reject USD 10 | not used | not used | ON | not used | not used | not used | not used | not used |
| Accept USD 10factory default | not used | not used | OFF | not used | not used | not used | not used | not used |
| Reject USD 20 | not used | not used | not used | ON | not used | not used | not used | not used |
| Accept USD 20factory default | not used | not used | not used | OFF | not used | not used | not used | not used |
| Reject USD 50 & 100 | not used | not used | not used | not used | ON | not used | not used | not used |
| Accept USD 50 & 100factory default | not used | not used | not used | not used | OFF | not used | not used | not used |
| Reserved | not used | not used | not used | not used | not used | ON | not used | not used |
| Reservedfactory default | not used | not used | not used | not used | not used | OFF | not used | not used |
| Harness Disable | not used | not used | not used | not used | not used | not used | ON | not used |
| Harness Enablefactory default | not used | not used | not used | not used | not used | not used | OFF | not used |
| Inhibit Active High | not used | not used | not used | not used | not used | not used | not used | ON |
| Inhibit Active Lowfactory default | not used | not used | not used | not used | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| ccTalk Parameters (default setting) (Note.4) | ON | not used | not used | not used |
| ccTalk Parameters (User setting)factory default | OFF | not used | not used | not used |
| 1 pulse / USD 1factory default | OFF | OFF | not used | not used |
| 2 pulses / USD 1 | ON | OFF | not used | not used |
| 4 pulses / USD 1 | OFF | ON | not used | not used |
| 20 pulses / USD 1 | ON | ON | not used | not used |
| Pulse Speed: 50ms LO / 50ms HIfactory default | not used | not used | OFF | OFF |
| Pulse Speed: 60ms LO / 300ms HI | not used | not used | ON | OFF |
| Pulse Speed: 30ms LO / 50ms HI | not used | not used | OFF | ON |
| Pulse Speed: 150ms LO / 150ms HI | not used | not used | ON | ON |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Pulse Normal Highfactory default | ON | not used | not used | not used |
| Pulse Normal Low | OFF | not used | not used | not used |
| Pulse Modefactory default | not used | ON | not used | not used |
| ccTalk Interface | not used | OFF | not used | not used |
| Reserved | not used | not used | ON | not used |
| Reservedfactory default | not used | not used | OFF | not used |
| Reserved | not used | not used | not used | ON |
| Reservedfactory default | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| 8-bit checksum | ON | not used | not used | not used |
| CRC 16-bit checksumfactory default | OFF | not used | not used | not used |
| Pulse Mode | not used | ON | not used | not used |
| ccTalk Interfacefactory default | not used | OFF | not used | not used |
| Reserved | not used | not used | ON | not used |
| Reservedfactory default | not used | not used | OFF | not used |
| Encryption MODEfactory default | not used | not used | not used | ON |
| Decrypt MODE | not used | not used | not used | OFF |
| Bill value | Pulse | ccTalk |
|---|---|---|
| BV1 | USD 1 | USD 1 |
| BV2 | USD 5 | USD 5 |
| BV3 | USD 10 | USD 10 |
| BV4 | USD 20 | USD 20 |
| BV5 | USD 50 | USD 50 |
| BV6 | USD 100 | USD 100 |
Before you power up
- Default setting.
- Use 2nd and 3rd dip of the internal dip-switch to change different interface protocol.
- Turn this dip to with restart the bill acceptor will restore ccTalk address to its default value of 40 and the encryption key to its default value of 123456. (ccTalk ONLY)
Not the sheet for your unit?
ICT ships the same model with different firmware and currency sets. Send us a photo of the label on the side of the acceptor and we will tell you exactly which settings apply.