Official ICT switch settings
NBA-USD6 DIP switch settings
Every switch function from ICT’s own setting sheet (part number SWCJUS6300-R), transcribed into tables you can read on a phone at the machine. Rows marked factory default are how the unit ships.
DIP switch tables
| Function | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 |
|---|---|---|---|---|---|---|---|---|
| Accept US$ 1factory default | ON | not used | not used | not used | not used | not used | not used | not used |
| Reject US$ 1 | OFF | not used | not used | not used | not used | not used | not used | not used |
| Accept US$ 5factory default | not used | ON | not used | not used | not used | not used | not used | not used |
| Reject US$ 5 | not used | OFF | not used | not used | not used | not used | not used | not used |
| Accept US$ 10factory default | not used | not used | ON | not used | not used | not used | not used | not used |
| Reject US$ 10 | not used | not used | OFF | not used | not used | not used | not used | not used |
| Accept US$ 20factory default | not used | not used | not used | ON | not used | not used | not used | not used |
| Reject US$ 20 | not used | not used | not used | OFF | not used | not used | not used | not used |
| Accept US$ 50factory default | not used | not used | not used | not used | ON | not used | not used | not used |
| Reject US$ 50 | not used | not used | not used | not used | OFF | not used | not used | not used |
| Accept US$ 100factory default | not used | not used | not used | not used | not used | ON | not used | not used |
| Reject US$ 100 | not used | not used | not used | not used | not used | OFF | not used | not used |
| Harness Enablefactory default | not used | not used | not used | not used | not used | not used | ON | not used |
| Harness Disable | not used | not used | not used | not used | not used | not used | OFF | not used |
| Inhibit Active Highfactory default | not used | not used | not used | not used | not used | not used | not used | ON |
| Inhibit Active Low | not used | not used | not used | not used | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 | SW1-2 | SW2-2 | SW3-2 | SW4-2 |
|---|---|---|---|---|---|---|---|---|
| 1 pulse / US$ 1factory default | OFF | OFF | not used | not used | not used | not used | not used | not used |
| 2 pulses / US$ 1 | ON | OFF | not used | not used | not used | not used | not used | not used |
| 4 pulses / US$ 1 | OFF | ON | not used | not used | not used | not used | not used | not used |
| 10 pulses / US$ 1 | ON | ON | not used | not used | not used | not used | not used | not used |
| Pulse Speed: 50ms LO / 50ms HIfactory default | not used | not used | OFF | OFF | not used | not used | not used | not used |
| Pulse Speed: 30ms LO / 50ms HI | not used | not used | ON | OFF | not used | not used | not used | not used |
| Pulse Speed: 60ms LO / 300ms HI | not used | not used | OFF | ON | not used | not used | not used | not used |
| Pulse Speed: 150ms LO / 150ms HI | not used | not used | ON | ON | not used | not used | not used | not used |
| EBDS Modefactory default | not used | not used | not used | not used | OFF | OFF | not used | not used |
| ICT104U Mode | not used | not used | not used | not used | ON | OFF | not used | not used |
| RS232 A1 Mode | not used | not used | not used | not used | OFF | ON | not used | not used |
| RS232 A0 Mode | not used | not used | not used | not used | ON | ON | not used | not used |
| not used | not used | not used | not used | not used | not used | ON | not used | |
| not used | not used | not used | not used | not used | not used | OFF | not used | |
| not used | not used | not used | not used | not used | not used | not used | ON | |
| not used | not used | not used | not used | not used | not used | not used | OFF |
- The second switch block is printed with a repeated SW1–SW4 header; -2 disambiguates it in this JSON.
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Credit-Pulse Normal HIGHfactory default | ON | not used | not used | not used |
| Credit-Pulse Normal LOW | OFF | not used | not used | not used |
| Pulse Modefactory default | not used | ON | not used | not used |
| Others Mode (Note 2) | not used | OFF | not used | not used |
| RFID function Enablefactory default | not used | not used | not used | ON |
| RFID function Disable | not used | not used | not used | OFF |
| Optical anti-fishing malfunction, BA will be still in working order | not used | not used | not used | ON |
| BA will stop work when it acknowledges optical anti-fishing malfunction.factory default | not used | not used | not used | OFF |
| Bill value | Pulse | RS232 A0 | ICT104U | RS232 A1 | EBDS |
|---|---|---|---|---|---|
| BV1 | US$ 1 | US$ 1 | US$ 1 | US$ 1 | US$ 1 |
| BV2 | US$ 5 | — | US$ 5 | — | US$ 5 |
| BV3 | US$ 10 | US$ 5 | US$ 10 | US$ 5 | US$ 5 |
| BV4 | US$ 20 | US$ 10 | US$ 20 | US$ 10 | US$ 10 |
| BV5 | US$ 50 | US$ 20 | US$ 50 | US$ 20 | US$ 20 |
| BV6 | US$ 100 | US$ 50 | US$ 100 | US$ 50 | US$ 50 |
| BV7 | — | US$ 100 | — | US$ 100 | — |
Before you power up
- Please reset the bill acceptor after any changes on DIP switch.
- SW2 (front panel right block) Dip Switch 1 to 4 are only for Pulse mode. If set to others mode, SW2 Dip Switch 1 to 4 can change to different interface.
- Barcode reader calibration procedure: Turn all bill values under reject mode; restart power; insert blank barcode ticket to calibrate reader head and NBA bezel flashing in green for 2 seconds; restore the original dip switch setting and restart power.
Not the sheet for your unit?
ICT ships the same model with different firmware and currency sets. Send us a photo of the label on the side of the acceptor and we will tell you exactly which settings apply.