Official ICT switch settings
NE77 B2B-USD6 DIP switch settings
Every switch function from ICT’s own setting sheet (part number SWX3US610-R), transcribed into tables you can read on a phone at the machine. Rows marked factory default are how the unit ships.
DIP switch tables
| Function | SW1 | SW2 |
|---|---|---|
| Accepted banknotes -> stacker / MDB Interfacefactory default | OFF | OFF |
| Accepted banknotes -> Recycler escrow buffer area. (Bill acceptor will disable while recycler is full.) / ICT Interface | ON | OFF |
| Banknote(s) dispensing mode. / Reserved | OFF | ON |
| Recycler -> Stacker. (Empty Recycler mode.) / Reserved | ON | ON |
| Function | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 | SW9 | SW10 |
|---|---|---|---|---|---|---|---|---|
| Normalfactory default | ON | not used | not used | not used | not used | not used | not used | not used |
| Diagnostic mode | OFF | not used | not used | not used | not used | not used | not used | not used |
| Optical anti-fishing malfunction, BA will be still in working order | not used | ON | not used | not used | not used | not used | not used | not used |
| BA will stop to work when it acknowledges Optical anti-fishing malfunctionfactory default | not used | OFF | not used | not used | not used | not used | not used | not used |
| Scaling Factor (SF) = 100; Decimal Point Position (DPP) = 2 (MDB only)factory default | not used | not used | ON | not used | not used | not used | not used | not used |
| Scaling Factor (SF) = 1; Decimal Point Position (DPP) = 0 | not used | not used | OFF | not used | not used | not used | not used | not used |
| Accept USD 1 & 5factory default | not used | not used | not used | ON | not used | not used | not used | not used |
| Reject USD 1 & 5 | not used | not used | not used | OFF | not used | not used | not used | not used |
| Accept USD 10 & 20factory default | not used | not used | not used | not used | ON | not used | not used | not used |
| Reject USD 10 & 20 | not used | not used | not used | not used | OFF | not used | not used | not used |
| Accept USD 50 & 100factory default | not used | not used | not used | not used | not used | ON | not used | not used |
| Reject USD 50 & 100 | not used | not used | not used | not used | not used | OFF | not used | not used |
| Reservedfactory default | not used | not used | not used | not used | not used | not used | ON | not used |
| Reserved | not used | not used | not used | not used | not used | not used | OFF | not used |
| Virtual MDB Recycler Function (Note.2)factory default | not used | not used | not used | not used | not used | not used | not used | ON |
| Standard MDB Recycler Function | not used | not used | not used | not used | not used | not used | not used | OFF |
| Bill value | MDB | ICT104R |
|---|---|---|
| BV1 | USD 1 | USD 1 |
| BV2 | — | — |
| BV3 | USD 5 | USD 5 |
| BV4 | USD 10 | USD 10 |
| BV5 | USD 20 | USD 20 |
| BV6 | USD 50 | USD 50 |
| BV7 | USD 100 | USD 100 |
Before you power up
- Please restart the bill acceptor after any changes on dip switch(s) has been made.
- Recycled Banknote represents as a virtual MDB coin type.
Not the sheet for your unit?
ICT ships the same model with different firmware and currency sets. Send us a photo of the label on the side of the acceptor and we will tell you exactly which settings apply.