Official ICT switch settings
NE77-USD3 DIP switch settings
Every switch function from ICT’s own setting sheet (part number SWETUS310-R), transcribed into tables you can read on a phone at the machine. Rows marked factory default are how the unit ships.
DIP switch tables
| Function | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 | SW9 | SW10 |
|---|---|---|---|---|---|---|---|---|---|---|
| Accept USD 1factory default | ON | not used | not used | not used | not used | not used | not used | not used | not used | not used |
| Reject USD 1 | OFF | not used | not used | not used | not used | not used | not used | not used | not used | not used |
| Accept USD 5factory default | not used | ON | not used | not used | not used | not used | not used | not used | not used | not used |
| Reject USD 5 | not used | OFF | not used | not used | not used | not used | not used | not used | not used | not used |
| Accept USD 10factory default | not used | not used | ON | not used | not used | not used | not used | not used | not used | not used |
| Reject USD 10 | not used | not used | OFF | not used | not used | not used | not used | not used | not used | not used |
| Reservedfactory default | not used | not used | not used | ON | not used | not used | not used | not used | not used | not used |
| Reserved | not used | not used | not used | OFF | not used | not used | not used | not used | not used | not used |
| Reservedfactory default | not used | not used | not used | not used | ON | not used | not used | not used | not used | not used |
| Reserved | not used | not used | not used | not used | OFF | not used | not used | not used | not used | not used |
| Reservedfactory default | not used | not used | not used | not used | not used | ON | not used | not used | not used | not used |
| Reserved | not used | not used | not used | not used | not used | OFF | not used | not used | not used | not used |
| Inhibit level Active Low (Scaling Factor (SF) = 100 (MDB only), Decimal Point Position (DPP) = 2)factory default | not used | not used | not used | not used | not used | not used | ON | not used | not used | not used |
| Inhibit level Active High (Scaling Factor (SF) = 1, Decimal Point Position (DPP) = 0) | not used | not used | not used | not used | not used | not used | OFF | not used | not used | not used |
| Pulse Normal Highfactory default | not used | not used | not used | not used | not used | not used | not used | ON | not used | not used |
| Pulse Normal Low | not used | not used | not used | not used | not used | not used | not used | OFF | not used | not used |
| MDB Modefactory default | not used | not used | not used | not used | not used | not used | not used | not used | OFF | OFF |
| Reserved | not used | not used | not used | not used | not used | not used | not used | not used | OFF | ON |
| ICT104U Mode | not used | not used | not used | not used | not used | not used | not used | not used | ON | OFF |
| Pulse Mode | not used | not used | not used | not used | not used | not used | not used | not used | ON | ON |
| Bill value | Pulse | MDB | ICT104U |
|---|---|---|---|
| BV1 | USD 1 | USD 1 | USD 1 |
| BV2 | USD 5 | USD 5 | USD 5 |
| BV3 | USD 10 | USD 10 | USD 10 |
Before you power up
- (1) Please reset the bill acceptor after set the dip switch.
- (2) Pulse speed is Lo = 50ms/Hi = 100ms.
Not the sheet for your unit?
ICT ships the same model with different firmware and currency sets. Send us a photo of the label on the side of the acceptor and we will tell you exactly which settings apply.