Official ICT switch settings
TAO-A-USD6 DIP switch settings
Every switch function from ICT’s own setting sheet (part number SWCBUS64000-R), transcribed into tables you can read on a phone at the machine. Rows marked factory default are how the unit ships.
DIP switch tables
| Function | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 |
|---|---|---|---|---|---|---|---|---|
| Reject USD 1 | ON | not used | not used | not used | not used | not used | not used | not used |
| Accept USD 1factory default | OFF | not used | not used | not used | not used | not used | not used | not used |
| Reject USD 5 | not used | ON | not used | not used | not used | not used | not used | not used |
| Accept USD 5factory default | not used | OFF | not used | not used | not used | not used | not used | not used |
| Reject USD 10 | not used | not used | ON | not used | not used | not used | not used | not used |
| Accept USD 10factory default | not used | not used | OFF | not used | not used | not used | not used | not used |
| Reject USD 20 | not used | not used | not used | ON | not used | not used | not used | not used |
| Accept USD 20factory default | not used | not used | not used | OFF | not used | not used | not used | not used |
| Reject USD 50 & 100 | not used | not used | not used | not used | ON | not used | not used | not used |
| Accept USD 50 & 100factory default | not used | not used | not used | not used | OFF | not used | not used | not used |
| Auto Detection SEND Signal (NISR Mode only) | not used | not used | not used | not used | not used | ON | not used | not used |
| Normal High SEND Signal (NISR Mode only)factory default | not used | not used | not used | not used | not used | OFF | not used | not used |
| Harness Disable (Other Mode: BA stops working when fishing) | not used | not used | not used | not used | not used | not used | ON | not used |
| Harness Enable (Other Mode: Normal)factory default | not used | not used | not used | not used | not used | not used | OFF | not used |
| Inhibit Active High | not used | not used | not used | not used | not used | not used | not used | ON |
| Inhibit Active Lowfactory default | not used | not used | not used | not used | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| 1 pulse / USD 1factory default | OFF | OFF | not used | not used |
| 2 pulses / USD 1 | ON | OFF | not used | not used |
| 4 pulses / USD 1 | OFF | ON | not used | not used |
| 20 pulses / USD 1 | ON | ON | not used | not used |
| Interface Timing Conversion — 50ms LO / 50ms HIfactory default | not used | not used | OFF | OFF |
| Interface Timing Conversion — 60ms LO / 300ms HI | not used | not used | ON | OFF |
| Interface Timing Conversion — 30ms LO / 50ms HI | not used | not used | OFF | ON |
| Interface Timing Conversion — 150ms LO / 150ms HI | not used | not used | ON | ON |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Reserved | ON | not used | not used | not used |
| Reservedfactory default | OFF | not used | not used | not used |
| ICT002U Modefactory default | not used | ON | ON | not used |
| NISR Mode | not used | OFF | ON | not used |
| Pulse Mode | not used | ON | OFF | not used |
| 5V Enable Mode | not used | OFF | OFF | not used |
| RS232 A0 Mode | not used | not used | not used | ON |
| Other Modefactory default | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| No ERROR CODE | ON | not used | not used | not used |
| Send ERROR CODEfactory default | OFF | not used | not used | not used |
| ICT002U Mode | not used | ON | ON | not used |
| NISR Modefactory default | not used | OFF | ON | not used |
| Pulse Mode | not used | ON | OFF | not used |
| 5V Enable Mode | not used | OFF | OFF | not used |
| RS232 A0 Mode | not used | not used | not used | ON |
| Other Modefactory default | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Credit-Pulse Normal HIGHfactory default | ON | not used | not used | not used |
| Credit-Pulse Normal LOW | OFF | not used | not used | not used |
| ICT002U Mode | not used | ON | ON | not used |
| NISR Mode | not used | OFF | ON | not used |
| Pulse Modefactory default | not used | ON | OFF | not used |
| 5V Enable Mode | not used | OFF | OFF | not used |
| RS232 A0 Mode | not used | not used | not used | ON |
| Other Modefactory default | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Credit-Pulse Normal HIGHfactory default | ON | not used | not used | not used |
| Credit-Pulse Normal LOW | OFF | not used | not used | not used |
| ICT002U Mode | not used | ON | ON | not used |
| NISR Mode | not used | OFF | ON | not used |
| Pulse Mode | not used | ON | OFF | not used |
| 5V Enable Modefactory default | not used | OFF | OFF | not used |
| RS232 A0 Mode | not used | not used | not used | ON |
| Other Modefactory default | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Reserved | ON | not used | not used | not used |
| Reservedfactory default | OFF | not used | not used | not used |
| Reserved | not used | ON | not used | not used |
| Reservedfactory default | not used | OFF | not used | not used |
| Reserved | not used | not used | ON | not used |
| Reservedfactory default | not used | not used | OFF | not used |
| RS232 A0 Modefactory default | not used | not used | not used | ON |
| Other Mode | not used | not used | not used | OFF |
| Bill value | Pulse | ICT | NISR | RS232 A0 |
|---|---|---|---|---|
| BV1 | USD 1 | USD 1 | USD 1 | USD 1 |
| BV2 | USD 5 | USD 5 | — | — |
| BV3 | USD 10 | USD 10 | USD 5 | USD 5 |
| BV4 | USD 20 | USD 20 | USD 10 | USD 10 |
| BV5 | USD 50 | USD 50 | USD 20 | USD 20 |
| BV6 | USD 100 | USD 100 | USD 50 | USD 50 |
| BV7 | USD 100 | USD 100 | — | — |
Before you power up
- 1. Reset the bill acceptor after setting the dip switch.
- 2. SW7 and SW8 of the 8-switch DIP and the 4-switch DIP are for pulse protocol only.
- 3. Pulse mode has out of service function.
Not the sheet for your unit?
ICT ships the same model with different firmware and currency sets. Send us a photo of the label on the side of the acceptor and we will tell you exactly which settings apply.