Official ICT switch settings
V6E-USD4 DIP switch settings
Every switch function from ICT’s own setting sheet (part number SWEUUS40200-R), transcribed into tables you can read on a phone at the machine. Rows marked factory default are how the unit ships.
DIP switch tables
| Function | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 |
|---|---|---|---|---|---|---|---|---|
| Reject US$ 1 | ON | not used | not used | not used | not used | not used | not used | not used |
| Accept US$ 1factory default | OFF | not used | not used | not used | not used | not used | not used | not used |
| Reject US$ 5 | not used | ON | not used | not used | not used | not used | not used | not used |
| Accept US$ 5factory default | not used | OFF | not used | not used | not used | not used | not used | not used |
| Reject US$ 10 | not used | not used | ON | not used | not used | not used | not used | not used |
| Accept US$ 10factory default | not used | not used | OFF | not used | not used | not used | not used | not used |
| Reject US$ 20 | not used | not used | not used | ON | not used | not used | not used | not used |
| Accept US$ 20factory default | not used | not used | not used | OFF | not used | not used | not used | not used |
| Reserved | not used | not used | not used | not used | ON | not used | not used | not used |
| Reservedfactory default | not used | not used | not used | not used | OFF | not used | not used | not used |
| High Acceptance | not used | not used | not used | not used | not used | ON | not used | not used |
| High Securityfactory default | not used | not used | not used | not used | not used | OFF | not used | not used |
| Reserved | not used | not used | not used | not used | not used | not used | ON | not used |
| Reservedfactory default | not used | not used | not used | not used | not used | not used | OFF | not used |
| Reserved | not used | not used | not used | not used | not used | not used | not used | ON |
| Reservedfactory default | not used | not used | not used | not used | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Reserved | ON | not used | not used | not used |
| Reservedfactory default | OFF | not used | not used | not used |
| Reserved | not used | ON | not used | not used |
| Reservedfactory default | not used | OFF | not used | not used |
| Reserved | not used | not used | ON | not used |
| Reservedfactory default | not used | not used | OFF | not used |
| Reserved | not used | not used | not used | ON |
| Reservedfactory default | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Reserved | ON | not used | not used | not used |
| Reservedfactory default | OFF | not used | not used | not used |
| Reserved | not used | ON | not used | not used |
| MDB Interfacefactory default | not used | OFF | not used | not used |
| Reserved | not used | not used | ON | not used |
| Reservedfactory default | not used | not used | OFF | not used |
| Reserved | not used | not used | not used | ON |
| Reservedfactory default | not used | not used | not used | OFF |
| Bill value | MDB |
|---|---|
| BV1 | US$ 1 |
| BV3 | US$ 5 |
| BV4 | US$ 10 |
| BV5 | US$ 20 |
Before you power up
- Default setting (Factory configuration has all switches in the OFF position.)
- Reset the bill acceptor after setting the dip switch.
Not the sheet for your unit?
ICT ships the same model with different firmware and currency sets. Send us a photo of the label on the side of the acceptor and we will tell you exactly which settings apply.