Official ICT switch settings
V7E/LX7-ANG8(ANG2+AWG2+USD4) DIP switch settings
This is the ANG + AWG + USD build. The units we supply are configured for US dollars, so the denominations and switch positions below will not match a USD machine. Call (877) 922-6707 or send us a photo of the unit label and we will send you the right sheet.
Every switch function from ICT’s own setting sheet (part number SWK4AN810-R), transcribed into tables you can read on a phone at the machine. Rows marked factory default are how the unit ships.
DIP switch tables
| Function | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 |
|---|---|---|---|---|---|---|---|---|
| Reject ANG 10 & AWG 10 | ON | not used | not used | not used | not used | not used | not used | not used |
| Accept ANG 10 & AWG 10factory default | OFF | not used | not used | not used | not used | not used | not used | not used |
| Reject ANG 25 & AWG 25 | not used | ON | not used | not used | not used | not used | not used | not used |
| Accept ANG 25 & AWG 25factory default | not used | OFF | not used | not used | not used | not used | not used | not used |
| Reject USD 1 & 5 | not used | not used | ON | not used | not used | not used | not used | not used |
| Accept USD 1 & 5factory default | not used | not used | OFF | not used | not used | not used | not used | not used |
| Reject USD 10 | not used | not used | not used | ON | not used | not used | not used | not used |
| Accept USD 10factory default | not used | not used | not used | OFF | not used | not used | not used | not used |
| Reject USD 20 | not used | not used | not used | not used | ON | not used | not used | not used |
| Accept USD 20factory default | not used | not used | not used | not used | OFF | not used | not used | not used |
| Exchange rate 1 USD=1.75 AWG/ANG | not used | not used | not used | not used | not used | ON | not used | not used |
| Exchange rate 1 USD=1.00 AWG/ANGfactory default | not used | not used | not used | not used | not used | OFF | not used | not used |
| Reserved | not used | not used | not used | not used | not used | not used | ON | not used |
| Reservedfactory default | not used | not used | not used | not used | not used | not used | OFF | not used |
| Reserved | not used | not used | not used | not used | not used | not used | not used | ON |
| Reservedfactory default | not used | not used | not used | not used | not used | not used | not used | OFF |
- Reset the bill acceptor after setting the dip switch.
| Function | SW1 | SW2 |
|---|---|---|
| Reservedfactory default | OFF | OFF |
| Reserved | ON | OFF |
| Reserved | OFF | ON |
| Reserved | ON | ON |
| Function | SW3 | SW4 |
|---|---|---|
| Reservedfactory default | OFF | OFF |
| Reserved | ON | OFF |
| Reserved | OFF | ON |
| Reserved | ON | ON |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Scaling Factor (SF) = 100; Decimal Point Position (DPP) = 2factory default | ON | not used | not used | not used |
| Scaling Factor (SF) = 100; Decimal Point Position (DPP) = 2 | OFF | not used | not used | not used |
| Reserved | not used | ON | not used | not used |
| Reservedfactory default | not used | OFF | not used | not used |
| Reserved | not used | not used | ON | not used |
| Reservedfactory default | not used | not used | OFF | not used |
| Reserved | not used | not used | not used | ON |
| Reservedfactory default | not used | not used | not used | OFF |
- Remove the front cover and the dip-switch in on the CPU board.
| Bill value | MDB |
|---|---|
| BV1 | ANG 10 & AWG 10 |
| BV2 | ANG 25 & AWG 25 |
| BV3 | USD 1 |
| BV4 | USD 5 |
| BV5 | USD 10 |
| BV6 | USD 20 |
Before you power up
- Reset the bill acceptor after setting the dip switch.
Not the sheet for your unit?
ICT ships the same model with different firmware and currency sets. Send us a photo of the label on the side of the acceptor and we will tell you exactly which settings apply.