Official ICT switch settings
V7E/LX7-BUD6(BBD4+USD2) DIP switch settings
This is the BBD + USD build. The units we supply are configured for US dollars, so the denominations and switch positions below will not match a USD machine. Call (877) 922-6707 or send us a photo of the unit label and we will send you the right sheet.
Every switch function from ICT’s own setting sheet (part number SWVR6BU62000-R), transcribed into tables you can read on a phone at the machine. Rows marked factory default are how the unit ships.
DIP switch tables
| Function | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 |
|---|---|---|---|---|---|---|---|---|
| Reject BBD 2 | ON | not used | not used | not used | not used | not used | not used | not used |
| Accept BBD 2factory default | OFF | not used | not used | not used | not used | not used | not used | not used |
| Reject BBD 5 | not used | ON | not used | not used | not used | not used | not used | not used |
| Accept BBD 5factory default | not used | OFF | not used | not used | not used | not used | not used | not used |
| Reject BBD 10 | not used | not used | ON | not used | not used | not used | not used | not used |
| Accept BBD 10factory default | not used | not used | OFF | not used | not used | not used | not used | not used |
| Reject BBD 20 | not used | not used | not used | ON | not used | not used | not used | not used |
| Accept BBD 20factory default | not used | not used | not used | OFF | not used | not used | not used | not used |
| Reject USD 1 | not used | not used | not used | not used | ON | not used | not used | not used |
| Accept USD 1factory default | not used | not used | not used | not used | OFF | not used | not used | not used |
| Reject USD 5 | not used | not used | not used | not used | not used | ON | not used | not used |
| Accept USD 5factory default | not used | not used | not used | not used | not used | OFF | not used | not used |
| Harness Disable (Other Mode: BA stops working when fishing) | not used | not used | not used | not used | not used | not used | ON | not used |
| Harness Enable (Other Mode: Normal)factory default | not used | not used | not used | not used | not used | not used | OFF | not used |
| Inhibit Active High | not used | not used | not used | not used | not used | not used | not used | ON |
| Inhibit Active Lowfactory default | not used | not used | not used | not used | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| 1 pulse / BBD 1factory default | OFF | OFF | not used | not used |
| 2 pulses / BBD 1 | ON | OFF | not used | not used |
| 4 pulses / BBD 1 | OFF | ON | not used | not used |
| 20 pulses / BBD 1 | ON | ON | not used | not used |
| Pulse Speed — 50ms LO / 50ms HIfactory default | not used | not used | OFF | OFF |
| Pulse Speed — 60ms LO / 300ms HI | not used | not used | ON | OFF |
| Pulse Speed — 30ms LO / 50ms HI | not used | not used | OFF | ON |
| Pulse Speed — 150ms LO / 150ms HI | not used | not used | ON | ON |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Pulse Normal Highfactory default | ON | not used | not used | not used |
| Pulse Normal Low | OFF | not used | not used | not used |
| Pulse Modefactory default | not used | ON | OFF | not used |
| ICT104U Interface | not used | OFF | ON | not used |
| MDB Interface | not used | ON | ON | not used |
| Reserved | not used | OFF | OFF | not used |
| Accept BBD polymer | not used | not used | not used | ON |
| Accept BBD ALL (Paper & polymer)factory default | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Reserved | ON | not used | not used | not used |
| Reservedfactory default | OFF | not used | not used | not used |
| Pulse Modefactory default | not used | ON | OFF | not used |
| ICT104U Interface | not used | OFF | ON | not used |
| MDB Interface | not used | ON | ON | not used |
| Reserved | not used | OFF | OFF | not used |
| Accept BBD polymer | not used | not used | not used | ON |
| Accept BBD ALL (Paper & polymer)factory default | not used | not used | not used | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Scaling Factor (SF) = 100, Decimal Point Position (DPP) = 2factory default | ON | not used | not used | not used |
| Scaling Factor (SF) = 1, Decimal Point Position (DPP) = 0 | OFF | not used | not used | not used |
| Pulse Mode | not used | ON | OFF | not used |
| ICT104U Interface | not used | OFF | ON | not used |
| MDB Interfacefactory default | not used | ON | ON | not used |
| Reserved | not used | OFF | OFF | not used |
| Accept BBD polymer | not used | not used | not used | ON |
| Accept BBD ALL (Paper & polymer)factory default | not used | not used | not used | OFF |
| Bill value | ICT104U | Pulse | MDB |
|---|---|---|---|
| BV1 | BBD 2 | BBD 2 | BBD 2 |
| BV2 | BBD 5 | BBD 5 | BBD 5 |
| BV3 | BBD 10 | BBD 10 | BBD 10 |
| BV4 | BBD 20 | BBD 20 | BBD 20 |
| BV5 | USD 1 | USD 1 | USD 1 |
| BV6 | USD 5 | USD 5 | USD 5 |
Before you power up
- (1) Default setting.
- (2) Use 2nd and 3rd dip of the internal dip-switch to change different interface protocol.
- (3) Remove the front cover and the dip-switch in on the CPU board.
- (4) Exchange rate: 1 USD = 2 BBD
Not the sheet for your unit?
ICT ships the same model with different firmware and currency sets. Send us a photo of the label on the side of the acceptor and we will tell you exactly which settings apply.