Official ICT switch settings

XBA-83X DIP switch settings

This is the CHF + CNY + EUR + GBP + JPY + RUB + TRY + USD build. The units we supply are configured for US dollars, so the denominations and switch positions below will not match a USD machine. Call (877) 922-6707 or send us a photo of the unit label and we will send you the right sheet.

Every switch function from ICT’s own setting sheet (part number SWZ483X10-R), transcribed into tables you can read on a phone at the machine. Rows marked factory default are how the unit ships.

DIP switch tables

XBA-83X Option Switch Settings
FunctionSW1SW2SW3SW4SW5SW6SW7SW8
ReservedONnot usednot usednot usednot usednot usednot usednot used
Reservedfactory defaultOFFnot usednot usednot usednot usednot usednot usednot used
Reservednot usedONnot usednot usednot usednot usednot usednot used
Reservedfactory defaultnot usedOFFnot usednot usednot usednot usednot usednot used
Reservednot usednot usedONnot usednot usednot usednot usednot used
Reservedfactory defaultnot usednot usedOFFnot usednot usednot usednot usednot used
Reservednot usednot usednot usedONnot usednot usednot usednot used
Reservedfactory defaultnot usednot usednot usedOFFnot usednot usednot usednot used
Reservednot usednot usednot usednot usedONnot usednot usednot used
Reservedfactory defaultnot usednot usednot usednot usedOFFnot usednot usednot used
BA disable 30 sec. / After reject bill 4 times consecutivelynot usednot usednot usednot usednot usedONnot usednot used
Enable Bill Reject 4 Times / BA Stop By 30 Secfactory defaultnot usednot usednot usednot usednot usedOFFnot usednot used
Stack Banknote when Power-upnot usednot usednot usednot usednot usednot usedONnot used
Reject Banknote when Power-upfactory defaultnot usednot usednot usednot usednot usednot usedOFFnot used
ENABLE IrDA Downloadnot usednot usednot usednot usednot usednot usednot usedON
Reservedfactory defaultnot usednot usednot usednot usednot usednot usednot usedOFF
  • This dip switch is located at the side of XBA.
XBA-82X (ICT108U)
FunctionSW1SW2SW3SW4SW5SW6SW7SW8
ReservedONnot usednot usednot usednot usednot usednot usednot used
Reservedfactory defaultOFFnot usednot usednot usednot usednot usednot usednot used
Reservednot usedONnot usednot usednot usednot usednot usednot used
Reservedfactory defaultnot usedOFFnot usednot usednot usednot usednot usednot used
Reservednot usednot usedONnot usednot usednot usednot usednot used
Reservedfactory defaultnot usednot usedOFFnot usednot usednot usednot usednot used
Reservednot usednot usednot usedONnot usednot usednot usednot used
Reservedfactory defaultnot usednot usednot usedOFFnot usednot usednot usednot used
Reservednot usednot usednot usednot usedONnot usednot usednot used
Reservedfactory defaultnot usednot usednot usednot usedOFFnot usednot usednot used
ICT108Unot usednot usednot usednot usednot usedONnot usednot used
Reservedfactory defaultnot usednot usednot usednot usednot usedOFFnot usednot used
  • This dip switch is located on the CPU board; remove the CPU board cover first.
Currency Assign Data
Bill valueICT108U (CHF)ICT108U (CNY)ICT108U (EUR)ICT108U (GBP)ICT108U (JPY)ICT108U (RUB)ICT108U (TRY)ICT108U (USD)
BV1CHF 10———————
BV2CHF 20———————
BV3CHF 50———————
BV4CHF 100———————
BV5—CNY 1——————
BV6—CNY 5——————
BV7—CNY 10——————
BV8—CNY 20——————
BV9—CNY 50——————
BV10—CNY 100——————
BV11——EUR 5—————
BV12——EUR 10—————
BV13——EUR 20—————
BV14——EUR 50—————
BV15———GBP 5————
BV16———GBP 10————
BV17————JPY 1000———
BV18————JPY 2000———
BV19————JPY 5000———
BV20————JPY 10000———
BV21—————RUB 10——
BV22—————RUB 50——
BV23—————RUB 100——
BV24—————RUB 500——
BV25—————RUB 1000——
BV26——————TRY 5—
BV27——————TRY 10—
BV28——————TRY 20—
BV29——————TRY 50—
BV30——————TRY 100—
BV31——————TRY 200—
BV32———————USD 1
BV33———————USD 5
BV34———————USD 10
BV35———————USD 20
BV36———————USD 50
BV37———————USD 100
Before you power up
  • After setting dip switch of the credit pulses, you should reset the bill acceptor again.
  • No sleep function.

Not the sheet for your unit?

ICT ships the same model with different firmware and currency sets. Send us a photo of the label on the side of the acceptor and we will tell you exactly which settings apply.